• Item: VPI Custom turntable  
  • Type: turntable  
  • Posted: 1 February 2012  
  • Builder: Anthony  
  • Country: Canada  
  • Comments: 2  

VPI Custom turntable

VPI custom table
This post is primarily to show my latest project. I have been acquiring VPI components a few years and the day has finally arrived. Having completed many commission pieces in the past I decided to construct a custom plinth and isolation base utilizing Gingko balls. Now that I have completed the project I decided to post a few photos. The final specifications of the turntable with the feet are, 21 ½ “ X 15 3/8" X 4 1/8" (W x D x H), not including the isolation platform. The table with the motor is quite massive at 63 ½ lbs. Once mounted on the platform a total of 76 ½ lbs., on the suspension balls. A visually stunning, imposing, rock solid piece of audio equipment, as I am sure you will agree. The construction of the table was executed with the utmost care and consideration for final performance of the rig.

Since completion I have spent many hours auditioning the table with many familiar favourite recordings that are known by audiophiles for their quality. I was immediately struck by the rigs’ absolute neutrality. The table disappears during playback, no colouration, an obvious absence of any audible mechanical or acoustic interference. I had acoustic feedback issues with my last table, absolutely none here. The finished table in all aspects, appearance and performance, has surpassed all my expectations. I am very excited with it and will now continue to immerse myself in listening.


  • lvcas
  • 11 March 2012 at 07:10PM
  • muy lindo modelo de torna mesa...es muy interesante la estética que posee la verdad sin palabras para esta obra de ingeniería..
  • julienlebas
  • 28 August 2012 at 03:21AM
  • Very nice! Thank you! May I ask what kind of motor you are using and how you are driving it? I am building a TT too and my main focus right now is on the motor. I use a DV Maxon motor but I am struggling a bit with the alimentation design.

Leave a Comment