• Item: CD Player  
  • Type: Playstation SCPH-1002 keys  
  • Posted: 10 July 2011  
  • Builder: blink  
  • Country: Portugal  
  • Comments: 1  

Blink

All functions through sensors on the front, with recording of symbols.
Front brushed aluminum whit 5mm thick.
PCB will be painted with rubber base.
Blue LED for better signal with noise reduction in jitter, and consequently more analog sound with more detail and more Dynamic.
Switch on / off the drive on the left side, right side has a Reset switch.
The laser was tuned to allow a reading on all CDs. It reads CD's recorded.
Fast-acting diodes were replaced on the power supply
Replacement of film capacitors in the primary system in exchange for the 47uf, capacitors Vishay (x2) 1120uF 400v (outside).
Replacement of film capacitors in the secondary system, with Panasonic (x2) 560uF +820 uF (attached inside).
Capacitors on the back for better visual aesthetic.
CD cover with clear acrylic.
Painted in color bordeaux.
The original condenser output of the DAC were replaced directly by audiophile quality Wima MKS2 capacitors.
All resistors and capacitors in various stages of unnecessary sound circuit were removed, the video section has been disabled

Comments

  • man
  • 4 May 2012 at 03:03PM
  • Dear Blink, I like very much your designs, specifically this one. Would be interested in getting one of these babies! Would go fine with my small Tripaths (Topping 20, 30 or 41). I still have some new Playstations (one), not used not modified. It would be great to hear from you:
    Best regard and congratulations!
    Man.
    Solarexpert@ymail.com

Leave a Comment