I did not build this amp my good friend Don did: Take a look at Don’s new 6C33C amp. The top plate is ABS plastic, the base is Australian Spotted Gum. There is a power tranni for the HT and a toroid for the 6C33C heaters. Two chokes are used to split the HT into two channel PS. Four separate DC supplied lay under the bonnet.



This is a three stage amp with 6SL7 driver tubes. The two 6SL7 triodes are linked with a cap but the second triode drives the power tube direct. Each power tube will run up to 220mA.



Don’s work is ultra neat but I had to correct all the wiring around the 6SL7 for him to get the amp to go. It sounds absolutely fabulous. Has to be Don’s best to date.

Comments